Featured Products

Black LCD Assembly for iPhone 6 Black LCD Assembly for iPhone 6
$83.99 $138.99
White LCD Assembly for iPhone 6 White LCD Assembly for iPhone 6
$87.99 $145.49
iPhone Tool Kit iPhone Tool Kit
$4.99 $8.95

How To Replace an iPhone 6 LCD Screen

Modified on November 10, 2015 by Nick
iPhone 6 Screen Replacement

The following guide is meant to give you a step by step instruction on how to replace a broken, damaged or cracked LCD assembly on an iPhone 6. Please be sure to take care during all steps of this repair as parts and flex cables can be easily damaged or broken. As well, you must be sure to keep track of where each screw is removed from so that when it comes time to re-install them you know exactly where to put them. When removing or lifting flex cables, it is suggest to use plastic spudgers or plastic opening and lifting tools. Before continuing it is advised to read the disclaimer at the bottom of this article.

We suggest the following parts and tools for this repair:

Step by Step iPhone 6 Screen Replacement

  1. Power off your iPhone.
  2. If your screen is badly damaged apply clear packing tape to its surface until the entire glass assembly is covered.
  3. Remove the 3.6mm Pentalobe or Phillips #000 screws located at the bottom of the phone near the dock connector. Note: The 5-point Pentalobe Screwdriver should only be used once as it has the potential to strip the screws.
  4. Secure a suction cup to the front LCD Assembly and gently pull on the assembly while using a pry tool along the bottom and sides and begin to lift the assembly away from the body of the phone.
  5. Remove the 5 Phillips head screws near the top right of the battery which secure the metal assembly cable bracket to the phone.
  6. Remove the metal assembly cable bracket.
  7. Carefully disconnect the Front-Facing Camera Flex Cable, Home Button Flex Cable, LCD Flex Cable and Digitizer Flex Cable from the logic board. Lift the assembly away from the iPhone.
  8. On the back of the broken display, remove the two screws connection the home button and lift away the metal shield.
  9. Disconnect the flex cable connection the home button to the display assembly.
  10. Gently remove the home button assembly and secure it to your new display.
  11. Re-assemble your iPhone by working the previous steps backwards. Be sure to remove the film from the back side of the LCD Assembly and remove the front film after re-assembly is complete.

Disclaimer

Note that the above information is provided for informational purposes only. We take no liability in for any damage or losses that may be done as a result of in-experience. If you are not comfortable with making repairs or cannot afford the loss of your device we suggest to contact an experienced professional to complete your repair.


Related Products

Black LCD Assembly for iPhone 6 Black LCD Assembly for iPhone 6
$83.99
White LCD Assembly for iPhone 6 White LCD Assembly for iPhone 6
$87.99
Small Parts Component Spudger Pry Tool for iPhone, iPod Touch, iPad Flex Cable Repairs Small Parts Component Spudger Pry Tool for iPhone, iPod Touch, iPad Flex Cable Repairs
$3.99
Nylon Plastic Spudger Component Pry Bar Opening Repair Tool iPhone iPod iPad Nylon Plastic Spudger Component Pry Bar Opening Repair Tool iPhone iPod iPad
$3.99
Suction Cup for iPhone Repair Suction Cup for iPhone Repair
$3.99
Pentalobe Screwdriver for iPhone Repair Pentalobe Screwdriver for iPhone Repair
$3.99
Phillips Head Screwdriver for iPhone Repair Phillips Head Screwdriver for iPhone Repair
$3.99
iPhone 4 4G 4S Mini Pentalobe Security Screw Set iPhone 4 4G 4S Mini Pentalobe Security Screw Set
$3.99

Comments

No comments have been posted yet.


Post Comment


Name
Website
Email
Comments
Subscribe All Comments Replies None
Verification9 + 9 - 2 =

Facebook
Twitter
LinkedIn
Google
Link To Directory
RSS Feeds
© 2024 Interfuse LLC. All Rights Reserved.