• Interfuse Web Development
  • Information Technology For Businesses
  • Computer Repairs, Networking and More
Register - Login View Cart


Featured Products

iPhone 5C 5S Battery iPhone 5C 5S Battery
$4.99 $8.49
iPhone Tool Kit iPhone Tool Kit
$4.99 $8.95

How To Replace an iPhone 5C Battery

Modified on November 10, 2015 by Nick
iPhone 5C Battery Replacement

The following guide is meant to give you a step by step instruction on how to replace a battery for your iPhone 5C that is no longer holding a charge. Please be sure to take care during every step of this procedure as parts and flex cables can be easily damaged or broken. As well, you must be sure to keep track of where each screw is removed from so that when it comes time to re-install them you know exactly where to put them. When removing or lifting flex cables, it is suggest to use plastic spudgers or plastic opening and lifting tools. Before continuing it is advised to read the disclaimer at the bottom of this article.

We suggest the following parts and tools for this repair:

Step by Step iPhone 5C Battery Replacement

  1. Power off your iPhone.
  2. Remove the 3.6mm Pentalobe or Phillips #000 screws located at the bottom of the phone near the dock connector. Note: The 5-point Pentalobe Screwdriver should only be used once as it has the potential to strip the screws.
  3. Secure a suction cup to the front LCD Assembly and gently pull on the assembly while using a pry tool along the bottom and sides to lift the assembly away from the body of the phone.
  4. Remove the 4 Phillips head screws near the top right of the battery which secure the metal assembly cable bracket to the phone.
  5. Remove the assembly cable bracket.
  6. Carefully disconnect the Front-Facing Camera flex cable, LCD Flex Cable and Digitizer Flex Cable from the logic board and set the screen assembly aside.
  7. Remove the two screws securing the metal bracket that is covering the battery flex cable at the bottom right hand side of the battery.
  8. Carefully disconnect the battery flex cable.
  9. Run the tip of a spudger between the battery and headphone jack to unfold the adhesive tape located at the bottom of the battery. Pull the battery adhesive away from the battery. Cut the tape in half and gently tug on each piece of tape until they are completely removed from the phone.
  10. Remove the battery from the phone.
  11. Proceed to install your new battery and follow these instructions in reverse order to re-assemble your phone.

Disclaimer - Note that the above information is provided for informational purposes only. We take no liability in for any damage or losses that may be done as a result of in-experience. If you are not comfortable with making repairs or cannot afford the loss of your device we suggest to contact an experienced professional to complete your repair.


Related Products

iPhone 5C 5S Battery iPhone 5C 5S Battery
$4.99
Small Parts Component Spudger Pry Tool for iPhone, iPod Touch, iPad Flex Cable Repairs Small Parts Component Spudger Pry Tool for iPhone, iPod Touch, iPad Flex Cable Repairs
$3.99
Suction Cup for iPhone Repair Suction Cup for iPhone Repair
$3.99
Pentalobe Screwdriver for iPhone Repair Pentalobe Screwdriver for iPhone Repair
$3.99
Phillips Head Screwdriver for iPhone Repair Phillips Head Screwdriver for iPhone Repair
$3.99
iPhone 4 4G 4S Mini Pentalobe Security Screw Set iPhone 4 4G 4S Mini Pentalobe Security Screw Set
$3.99

Comments

No comments have been posted yet.


Post Comment


Name
Website
Email
Comments
Subscribe All Comments Replies None
Verification3 + 7 - 5 =

Recently Viewed
iPhone 4S Battery iPhone 4S Battery
$3.99

iPhone 5C 5S Battery iPhone 5C 5S Battery
$4.99

Coal Mining Light Coal Mining Light
$34.99

Recently Published

ELM327 OBD2 Interface Adapter Complete Guide
ELM327 OBD2 Bluetooth, WiFi and USB Interface Adapter guide. Teaches you everything you need to know about the ELM 327 car diagnostic tool.

Newsletter

Follow Us

2224 Pleasant View Rd. Suite 10, Middleton Wi 53562 USA Sitemap - © Interfuse LLC. All Rights Reserved.